Ligne de fente simple pour le goujon en métal et la voie

Processing material:

ALUZINC, or ALUMINIUM or STAINLESS STEAL

Material thickness 

0.5-0.8mm

Material hardness

195 mpa---350 mpa

Materisl width

Max 1000 mm

Inner diameter

508mm   

Max out diameter

1200mm  

Max weight

Max weight: 5 T 

Configurations

Decoiler, Slitting device, Cutting device, Recoiler

Decoiler specifications

Max coil weight:

5 T 

Inner diameter:

GI 508mm

Max out diameter

1250mm

Hydraulic station power:

3 kw

Decoiler speed:      

0-25m/min

Finished product specifications:

width tolerance:

0.5mm                   

Min slitting width:  

25 mm

Forming steps

10 rollers

Shaft diameter

40mm

Design type

Memorial arch

Slitting device specifications

Slitting speed:

0-25mm/min

Driving motor:

15 Kw

Slitting shaft diameter

Ф100mm

Shearing blade

9 pieces

Max slitting pieces

10 pieces

Min slitting width

25 mm

Shearing blade material:

9CrSi

Pinching roller:

2 couples  

Cutting device.

Cutting thickness

0.3-1.0mm

Cutting length

500-4000mm

Cutting width

900-1250mm

Cutting speed:

4-15m/min

Recoiler specifications:

Max coil weight: 

5 T

Inner diameter: 

508/610mm

Max out diameter:

1250mm

Recoiler motor:  

7.5Kw

Hydraulic station power:

3Kw

Recoiler speed:

0-25m/min

Voltage

220v/60hz/3ph(or as required)

5T decoiler

1 set

Slitting device   

1set

Extension device

1 pc

5T coiler

1 set

Coil car     

1 pc

Hydraulic Station  

2pcs

Delivery Terms:

- Shipment within 60 days after receipt of down payment.

Payment Terms:

Payment of the contract with following schedule:

- 30%: The payment shall pay by T/T the downpayment to the Seller within 15 days after the signature of the Contract. The Contract then comes into effect.

- 70%: The buyer shall pay to the seller 70% of total contract amount before the seller`s ship the machine to XINGANG, CHINA.

Equipment Manufacturing and Inspection/Test

1. The Seller manufactures the equipment according to the relevant standards strictly and tests the equipment according to the technical documents.

   2. The Buyer shall inspect and test the commodities at the Seller`s factory at the Seller informs to confirm their conformity to the Contract Specifications. If the Buyer fails to arrive on time, the Seller shall have the right to deliver the goods according to the date stipulated in the Contract.

T  Technical Documents

The Seller shall submit the following documents in English:

   1. Foundation Plan (including the arrangement of water, electricity and air etc.)

2. Arrangement Plan

3. Operation Instruction (including the structure diagrams of the equipment, operation instruction, maintenance and trouble shooting, safe rules, consumable parts list and purchased parts list)

I   Installation, Commissioning, Test and Training

1. The engineers from the Seller shall supervise the installation on site and fulfill the commissioning. They should start off within 10 days after they get the information from the Buyer.

2. The Seller trains the operators of the Buyer during the commissioning

3. Commissioning: about 3 engineers in 30 days.

4. The Buyer shall pay for the international air tickets and the local, such as board and lodging, daily transportation, communication,Insurance, etc. The Buyer shall pay USD 50 /day /person to the Seller for the commissioning.

5. The Buyer shall prepare an interpreter for better communication between the two sides.